So here is the finale...
Multiple Beers, frustrations, and a search for valve cover bolts that was equal to an episode of "24" culminated in a successful replacement of a valve cover gasket...
If you notice the nice new shiny bolts that are on the valve cover gasket, those are the new ones!
Speaking for a moment on the issue of locating valve cover bolt replacements: Don't bother doing a search online for these...No one thought to offer this part...If you call the dealership, they will tell you that it will take a week and they will be in on Tuesday...I went to the dealership to order them and the guy in the parts department gave me the same bolt for free...I went to put them on the valve cover and needed washers because the bolt was not capped....SOOOOOOOOOO!!! I called in a chopper and flew over to Advanced Auto parts to get some bolts...In the search for an appropriate washer, guess what I found?! The actual same friggin bolt as the original one, except it was a stronger version...
Note to those with the same or similar Jeep as mine...If the valve cover bolts have slashes on the top, that means its the USA version of measurement not the metric system...The bolts for my valve cover are 1/4-20 and are capped...Meaning the washer is basically already part of the head piece...You can buy four of these for about $2.50 at the auto parts store...Bring an orginal bolt for comparison and measurement and you should be fine...
When you call around for a simple part like that and ask the person who is supposed to know what the hell you are talking about, they act like it is some major component and cannot be found without ordering....The truth is, it is just a USA standard 1/4-20 one inch grade 5 bolt that you can pick up at the local auto parts shop!
No comments:
Post a Comment